Description Reviews The more camber you can run in the front of your MINI, the better turn in you will get with. You can now easily adjust front camber with Vorshlag's camber plates. Over-sized spherical bearings are designed to withstand the rigors of street and track abuse. As a bonus all components are plated for maximum corrosion resistance and long life. In order to properly use Vorshlag camber plates, you must choose spring perches that match your strut brand and spring type. Vorshlag camber plates are designed to be compatible with 2.5± & 60mm coilover style springs, and stock style springs and all strut types. If you have any questions, call us before ordering. Specs: Compatible with 2.5" and 60 mm Coilover springs (included). For a small additional charge, they can come with modified OEM style upper spring perches. Compatible with all strut brands and types. Don't see your strut model in the options? Drop us a line and we'll design a set-up for you. No need to change camber plates when switching from regular springs to coilovers! Some companies sell you two totally different camber plates for coilover springs and factory style springs. Installs with basic hand tools, little to no chassis modifications required. Plates are designed specifically for the MINI chassis. Camber is easily adjustable from the engine compartment with simple hand tools (1/4" ball end hex nut wrench). Takes seconds per side. The spherical bearing used in the Vorshlag camber plate is the largest used in any MINI camber plate. The result has much better durability and wear characteristics than the undersized bearings used in many competitors' plates. Provides up to -3 front camber! A huge benefit for the Mini chassis. A must for all track driven or autocross cars (when class rules allow for camber plates). There is no change in ride height from the OEM upper mounts (stack-up height is 51mm vs 53 for the stock mount + perch). 100% CNC machined, alloy steel bearing holders. Tough as a German Tank! All components plated for maximum corrosion resistance and long life. Red anodized aluminum CNC machined main plates. Vorshlag Upper spring perches included (see "Spring Perch" drop down option menu). 1 Review 5 Solid plates with great design Posted by Eric Tachell on 5th Sep 2018 I needed adjustable plates to even out the camber between the two sides and did a lot of research. I went back and forth between a couple different brands and went with Vorshlag for a couple reasons. First is that when reading reviews and forum posts about each brand, I found that Vorshlag plates were purchased when another brand failed. Plus I never found a post or review where Vorshlag plates failed themselves. Second was the results from a quick email discussion with Chad at Detroit Tuned and his experiences with them on his personal vehicles. He made excellent points and past dealings with Detroit Tuned have all led to total success. Couple that with the fact that Detroit Tuned only sells this brand says something when other brands could be sold along with Vorshlag and a choice is made not to. That tells me something about the company and the product. After installing and driving on these plates for a little bit now I can say that these are excellent plates!. The steering is easier and tighter than the factory plates and I was able to get my camber setup perfectly. The alignment guy said they were the nicest set he's seen too. I don't think they ride more harsh than the factory runner mounted plates, but there is a difference and the difference is good! My car is a daily driver so the exposed spherical bearing is a bit of a concern, but the plates are rebuildable so I'm not worried. These plates can't be beat!