Kit in Place

MINI Cooper Clubman Spare Tire F54 (5 Lug) KIT

(No reviews yet) Write a Review
MSRP: $260.50
$217.08
(You save $43.42 )
SKU:
DT Spare 5 Lug F54 KIT
UPC:
DT Spare 5 Lug F54 KIT
Weight:
36.00 LBS
Shipping:
Calculated at Checkout

Here is the best and most complete option for anyone that has decided the run flats were not the tire for them anymore (everyone?), but are afraid of running around without a spare. This spare tire will fit under the rear cargo tray area for long road trip or day to day driving. This 5 lug wheel will fit all F54 Clubmans. (See Photo's)

This spare comes mounted and ready to use. Nothings could be easier. As an added bonus, we installed a sticker on it for quick easy reference to show you to keep inflated to 60 PSI & to install it on the rear! We also install a 2 inch valve stem to make checking and filling the air pressure easier. This wheel is a stock MINI spare tire rim (3.5 wide, 17" wheel, with a ET:18mm and 5x112mm lug pattern & 66.5 center bore), paired with a Kenda 125/70/17 tire to keep all your wheels close to the same diameter. This kit will fit over most front brakes that the MINI has, but will fit over ALL REAR brakes on the MINI UNLESS you have the JCW Sport Brake option (brembo kit) on your car. And for safety, you should always run a spare tire on the rear. No Spacers, adapters, or special lugs needed to make this work with your MINI. This spare is about 23.9" in diameter and a little over 5" thick with the tire installed. This is the correct size spare for all MINIs no mater what size wheel and tire you have. This is designed to be used in an emergency situation for 60 miles or less and under speeds of 50 mph. By using this you will not cause any damage to the vehicle if driven in a normal manner.

 

We have paired the spare tire with the mounting system that MINI has designed for this spare.  it comes with the the foam tool tray, cover and bolt.  Your car may need some minor trimming to make everything fit and work.  Cars that didn't get ordered with the mobility package have some different trim and may need light modification to make it all fit. All cars should have the nut insert already welded into the body, but you may need to make a hole in floor panel with a sharp knife. Also the pocket the spare tire slides into might need trimming some of the plastic away to give it a pocket.

 

In this kit you get the spare tire, foam tray, lid cover, and hold down bolt. If you need tools let us know!

 

Note: Will fit ALL 4 also.