Description Reviews The Powerflex Steering Rack Bushing helps steady the rack from movement on the passenger side. If you have had a power steering leak on your car, chances are the fluid leaked on the factory bushing causing it to expand and become sloppy. Or if you are looking to make the car as tight as you can for for the track, this is the bushing for you. Comes with everything you needed to install it into your car! Powerflex polyurethane bushings are designed to decrease the amount of deflection in your car's suspension for better handling, more driver feedback, and better tire wear. Powerflex uses premium polyurethane materials for minimal NVH (noise, vibration, harshness) and increased longevity over the stock rubber bushings. Bushings come in pre-determined durometers (measured hardness) from Powerflex to work best in each particular location. The street bushing will work best for mostly everyone. They have been spec'd by Powerflex to be the best durometers for your application and are 70A (Yellow), 80A (Purple), and 95A (Black). Powerflex copper-based grease is supplied with every dynamic product. We suggest using only a copper-based grease for lubrication. Due to grooves and knurls cast into the material to hold the lubricant, bushings will rarely need re-lubing. We do not suggest using an "anti-seize" product for lubrication. Want a stiffer bushing? Have a track car? Try “The Black Series”. A new range of bushings developed for Race, Rally and Circuit use. The Powerflex Black Series bushings are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. Currently Special Order at this time. Warranty: All Powerflex bushings are made in the UK and come with a 1 year, unlimited mile warranty.