MINI Cooper S Coolant Hose Kit G1

MINI Cooper S Coolant Hose Kit. We have installed a few hoses over the years and have seen wear on hose #9 (in the above photo) from wearing on the fan housing. We have also seen wear on hose #6 from wearing on the clamp #10 that holds hose #9 to the water pump. We have included item 4 in this kit because over the years from coolant flushes the bleeder screw can get chewed up and could break off inside the fitting. We now include the bleeder screw in metal! We really only see this type of wear on higher mileage cars, and only in a hand full of cars, based on how. If you're replacing the radiator or a supercharger, this might be an item that you want to think about replacing. We have been surprised how well the rubber has held up over the years on the MINI, but we all know MINI owners take really good care of their cars. So if you have bought it used you might want to look it over. we also have a 2 line kit if you only want they 2 lines that normally have issues.

These are a MINI OEM hoses that come with clamps as shown. Fits all MANUAL Generation 1 MINI Cooper S's, 2002-2006 R53 MCS & 2005-2008 R52 MCS convertibles. You can reuse the small line clamps. Don't forget some quality fluid and make sure it's mixed to 50/50. If you need any part of this system by itself, we can also get one for you. Just give us a call.

This kit includes:

• MINI Radiator Hose #1 MCS Manual Trans #17-12-7-515-500
• MINI Cooling System Bleeder Valve MCS #17-12-7-515-502A (Aftermarket Metal!)
  
• MINI Radiator Hose #6 MCS Manual Trans Upper #17-12-7-515-501
• MINI Radiator Hose #9 MCS Manual Trans #17-12-1-475-574
• MINI Radiator Hose #4 MCS Lower Expansion Tank to Coolant Lines #17-12-7-518-581
• MINI Radiator Hose #7 MCS Upper Expansion Tank to Coolant Lines #17-12-7-518-577