Description Videos Reviews ARP Pressure Plate Bolts for all MINI Cooper & S gen 2 cars with the N12/N14/N16/N18 engines. This bolt will work for all cars, motors, trans, JCW, and ALL4 cars! These bolts hold the clutch pressure plate to the flywheel and can be reused over and over. They are also made to ARP's high standards and are much stronger than stock! MINI recommends new hardware every time you change the flywheel which will run you at least $11-$18 dollars. Buy the better bolt that is stronger and it will never have to be replaced again. One pack will do one car. Comes with required washers. ARP recommends 25 ft. lbs. tq. & a thread locker. Note: You will need a 10mm socket, & 3/8 drive torque wrench. Special Presentation: How ARP Fasteners Are Made Video Series Part 1/3 V8TV #musclecar #v8tv Installation Available: http://v8speedshop... Special Presentation: How ARP Fasteners Are Made Video Series Part 2/3 V8TV #musclecar #v8tv Installation Available: http://v8speedshop... Special Presentation: How ARP Fasteners Are Made Video Series Part 3/3 V8TV #musclecar #v8tv http://www.v8tvshow.com - It's no secret tha... Always Read the Instructions! We know the first thing most people do is throw away the instr... Why Use ARP Ultra-Torque Fastener Assembly Lubricant