MINI Cooper Coil Pack Kit G3

(No reviews yet) Write a Review
$189.95 - $249.95
5.00 LBS
Calculated at Checkout

Did you know that it is highly recommended to replace spark plugs and coil packs at the same time to keep your MINI running in tip top shape? We know life is busy and you don’t always have time to search for products. Now that you know what the professionals recommend, you can quickly order the parts you need with the click of a button! We created this kit featuring a set of 4 coil packs and 4 NGK Spark Plugs to make everyone’s lives easier. Per the coil pack manufacturer’s part warranty, warranty will be void if you do not replace the spark plugs at the same time.

How do you know if you need a new coil pack? The car will give you an SES light (Service Engine Soon), as well a rough idle, and once you read the codes, it comes back to a misfire or coil pack for cylinder X. A surefire way to know that it's that coil pack is to move it to another cylinder and see if you get the same code for that new cylinder #. You don't always have to replace all 4 coils at the same time, but it is advisable.

We have found that people are keeping their spark plugs in longer than they should based on recommended service intervals, which in turn makes the coil pack work harder to make sure the cylinder is working correctly. It then burns out the coil before it should ever need replacing. We have seen  Cooper's with coil problems at early as 60K. The Cooper S's are not immune to this problem, but we have been finding that it's in less numbers and higher mileage. NGK Laser Iridium Spark Plugs for Gen 3 MINI Cooper & S will give you the most out of your car's engine! This is better than the factory OEM plug that comes in all F car Models, Cooper, Cooper S, JCW, and ALL4 models (it fits it all)!

Kit Includes:

  • (3 or 4) NGK Laser Iridium Spark Plugs for Gen 3 MC-MCS (Stock Heat Range) SILZKGR8B8S (94201)
  • (3 or 4) MINI Ignition Coil for all Gen 3 #12-13-8-643-360

Sold in sets of 3 or 4 depending on what engine you have!

Note: All plugs come pre-gapped to .031 in (.8mm) with a protective sleeve.

Install Tip: Torque new plugs with a torque wrench to min 17.4 ft lbs. DT Tip: Give it a bit more, but not more than 22 ft lbs. You MUST have a deep well 14mm 12 point socket (or Spark Plug socket for that plug style), a 3/8 10 inch extension, and 3/8 inch lbs. torque wrench.