R60/R61 Brake Pad Wear Sensor

(No reviews yet) Write a Review
$29.99 - $59.98
1.00 LBS
Calculated at Checkout

R60/R61 MINI Cooper Front or Rear Brake Pad Wear Sensors! These brake pad sensors are for all Countryman or Paceman models.

MINI recommends to change this part with every brake service, but you really only need to replace this if the light is tripped on your dash or you break it while removing it. But a lot of the time they will break when taking them out of the old pads. If you decide this option, there is another way to get the light to turn off. Cut the wires about 3 to 4 inches from the plug. Expose the wires ¼ from the end and twist them together. Cover it with some electrical tape and then just reset the light. But remember you don't have a light to tell you when you need new pads so you have to check them from time to time. We recommend replacing them. Make sure the new sensor is routed correctly and is secured tightly. Some places may require some zip ties like the factory has in places, or some extra ones to keep things tight.  This is a high quality aftermarket item that is as good as the OEM, but at a lower cost!

Reset Instructions