Loading... Please wait...

Our Newsletter

Brake Pad Wear Sensor

  • Gen 1
  • Gen 2
Brake Sensor
1.00 LBS
Calculated at checkout

Product Description

MINI Cooper Front or Rear Brake Pad Wear Sensors!

MINI recommends to change this part with every brake service, but you really only need to replace this if the light is tripped on your dash or you break it while removing it. But a lot of the time they will break when taking them out of the old pads. If you decide this an option you don't need to save a few bucks, there is another way to get the light to turn off. Cut the wires about 3 to 4 inches from the plug. expose the wires ¼ from the end and twist them together. Cover it with some electrical tape and then just reset the light. But remember you don't have a light to tell you when you need new pads so you have to check them from time to time. We recommend replacing them. Make sure the new sensor is routed correctly and is secured tightly. Some places may required some zip ties like the factory has in places, or some extra ones to keep things tight.

Pick from Gen 1 or Gen 2, Front and/or Rear. Whatever you need, we have you covered.

Reset Instructions

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Brake Pad Wear Sensor to your wish list.

You Recently Viewed...