MINI Cooper Brake Pad Wear Sensor G1

Gen 1 MINI Cooper Brake Pad Wear Sensors! This sensor is for all Gen 1 cars - R50, R52, R53, you can choose front, rear, or both!

MINI recommends to changing this part with every brake service, but you really only need to replace this if the light is tripped on your dash or you break it while removing it. But a lot of the time they will break when taking them out of the old pads. If you decide this option, there is another way to get the light to turn off. Cut the wires about 3 to 4 inches from the plug. Expose the wires ¼ from the end and twist them together. Cover it with some electrical tape and then just reset the light. But remember you don't have a light to tell you when you need new pads so you have to check them from time to time. We recommend replacing them. Make sure the new sensor is routed correctly and is secured tightly. Some places may require some zip ties like the factory has in places, or some extra ones to keep things tight.

Reset Instructions