KW V1 Coilover G1

(No reviews yet) Write a Review
42.00 LBS
Calculated at Checkout

PLEASE NOTE: We do not stock these, they are special order and ship from Germany. You may experience delays as long as 90 days from order. We apologize if this causes an inconvenience, this is beyond our control.


The KW coilover kit Variant 1 is the entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, stainless steel struts, corrosion resistant springs and bump stops, as well as compatible components, stand for long driving pleasure - not just the car's life. 

Continuous lowering

With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model, this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster; on the rear axle this is the same unless the car has a separate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans

KW coilover Variant 1 satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW, as a manufacturer, uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1, rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience

They are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany." Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers!

  • Optimally pre-adjusted
  • Sporty and comfortable dampening technology
  • Stainless steel technology
  • Individually height adjustable
  • tested adjustment range
  • Ready to install complete solution
  • High quality components for a long durability
  • Complete documentation for easy handling

Setup - Factory pre-configured damping setup

The KW coilover Variant 1 has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving. Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1.

Notes: Photo is a stock photo and may not look like the units you get. You may need a 15mm spacer for the front wheels to clear the coilovers on some models. You will need front and rear Detroit Tuned End Links to make this all work correctly and corner balance the car. You will also need a set of H-Sport Rear Control Arms to get the rear camber correct during an alignment. It may also be advisable to add Camber Plates to the front of the car depending on what you want out of the car and what you are trying to do.